Xiaomi Mobile Phone Fingerprint U Shape Lock U8 Anti Theft Bicycle Motorcycle Bike Car Door Type Rechargeable Waterproof Dustproof

Please Note It, This Item Comes From Xiaomi Eco Chain Cooperation, Specialized In Best Products With The Best Quality, So There Is No Xiaomi Logo On It, Thanks. Much More Hottest Eco Chain Products On Xiaomi Youpin. Features:- 0.5S Fast Unlock, Optimized The Recognition Speed And Unlock Precision.- Biometric Fingerprint Recognition, High Precision Recognition And Safety.- Anti-Thief, Unlock The Buckle At Both Ends Of The Lock Beam At The Same Time To Open The Lock, Effectively Prevent Violent Pry The Lock.- Full Metal Solid Lock, Technical Unlocking Technology And Anti-Violent Destruction.- Ip65 Waterproof Amp; Dustproof Prolong The Use Lifespan Of Lock.- Smooth, Strong And Durable Stainless Steel Lock Beam Wrapped With Pvc.- Built-In 260Mah Non-Detachable Waterproof Battery, Once Charging For Max.- 3000Times Use- Emergency Key: Yes- Fingerprint Protective Cover: Yes- Type-C Charging Port: Yesspecification:Brand: Xiaomimodel: U8colour: Black Material: Aluminium Alloy + Pvc + Stainless Steel Lock Beam Diameter: 13Mm/16Mmbattery Capacity: 260Mah Built-In Li-Ion Battery Charging Time: About 1.5 - 2Hstandby Time: About 12 Months Long Battery Life Charging Port: Type-Weight: Short Version: 1200G, Long Version: 1360Glong Version Size: 30.00 X 13.00 X 3.22 Cmshort Version Size: 22.48 X 13.00 X 3.22 Cmpackage Weight: 1350G/1500Gpackage Size: Approx. 28.0 X 15.5 X 5.0Cm/32X15.5X5.0CmYou Will Receive:1 * Areox Fingerprint U Shape Lock2 * Keys Administrator Account Setting:1. Push The Cover To The Right Side Before Use The Fingerprint Lock2. Press The Fingerprint Sensor For 3-4 Seconds Until The Blue Light On, After Hearing A Click Sound, You Can Enter The Administrator's Fingerprint.3. Put The Finer Set As The Administrator Account On The Sensor, The Blue Will Light Off Along With A Click Sound. Remove The Finger And Place It Again, The Blue Will Flash Along With A Click Sound. Keep Doing That For 10 Times. (Please Note That, The Red Lighting On During Fingerprint Recording Means Input Failed, It Can Continue To Be Placed 10 Times. The Blue Light Is On Along With A Long Click Sound Means The Administrator's Fingerprint Input Is Successful. )4. When The Blue Light Is On Along With A Long Beep, Then The Light Is Off, The Lock Enters Standby Mode. The Administrator Account Is Set Up Successfully.(When Setting The Administrator's Fingerprint, No Operation Within 5 Seconds, The Lock Will Be Into Standby Mode After Red Lighting On And Then Lighting Off.)Other Users Fingerprint Setting: Only Support 9 Sets Of User Fingerprint Storage. Note: If You Want To Enter A New Fingerprint But The Number Of Fingerprints Is Full, You Need To Delete The Fingerprint (This Will Delete All The Fingerprints Already Entered) And Re-Set The Fingerprint Of The U-Lock1. Press The Fingerprint Sensor Until The Blue And Red Lights Flash Alternately To Verify The Administrator's Fingerprint.(If The User's Account Is Full, Long Pressing The Fingerprint Sensor Until The Red Lighting On With Two Beeps, Then The Light Is Off And The Lock Gets Into Standby Mode.2. Place The Administrator's Finger On The Fingerprint Sensor. The Blue Light Is On Along With A Click Sound, And The User's Fingerprint Can Be Entered At This Time.(If The Administrator's Fingerprint Verification Is Incorrect, The Blue And Red Lights Will Continue To Flash With 4 Beeps, Please Try It Again. Only 5 Times For Trying. If All Fail, The Indicator Light Goes Out And Enters Standby Mode.3. Place The User's Finger On The Fingerprint Sensor, And The Blue Light Is Off Along With A Click. Remove Your Finger And Place It Again, And The Blue Light Flashes With A Click. Repeat The Same Step For 10 Times.(Please Note That, The Red Lighting On During Fingerprint Recording Means Input Failed, It Can Continue To Be Placed 10 Times. The Blue Lighting On Along With A Long Click Sound Means The Administrator's Fingerprint Input Is Successful. )4. When The Blue Light Is On With A Long Beep, Then The Light Goes Out And Goes Into Standby. Then The User Account Is Set Successfully.(When Setting The Users' Fingerprint, No Operation Within 5 Seconds, The Lock Will Be Into Standby Mode After Red Lighting On And Then Lighting Off. User Account Settings Failed, Please Try Again.)